• vanlifeyoga


Updated: Apr 7, 2020

This was one of the easier steps! I had left over insulation from the walls and ceilings so I used that for the floor as well.

During this installation I used:

- Roberts moisture barrier

- Super Tuff-R polyiso insulation

- 1/2in plywood

- Reflectix tape

First thing you want to do here is make sure that your floor is super clean! I then laid out the moisture barrier and used the reflectix tape to secure it to the floor/edges of the van.

I was lucky enough to have the old floor of my van still so I simply used it as a template for the floor. I cut out the insulation and installed that down in three separate pieces.

I used the template again for the ply wood and was able to do that in two pieces. After the ply was down I did a little sub floor dance!

19 views0 comments

Recent Posts

See All